Sameh S. Badie

Professor

Department: Civil and Environmental Engineering

Contact:

Email: Sameh S. Badie

Office Phone: (202) 994-8803

SEH 3830 | Office Hours: M, W: 11:00 am - 1:30 pm; Virtual: By appointment

Professor Sameh Badie conducts research on reinforced and prestressed concrete structures, with applications on buildings and highway bridges. His research includes theoretical and experimental investigation. Professor Badie has a significant amount of experience developing innovative prestressed, precast, concrete deck panel systems for highway bridges. His experimental experience includes testing full-scale concrete components, such as deck panel systems and prestressed concrete girders.

Education

B.S., Ain Shams University, 1983
M.S., Ain Shams University, 1989
Ph.D., University of Nebraska-Lincoln, 1997

Publications

Research Project Reports

Badie, S.S., and Tadros, M.K., "Full-Depth, Precast-Concrete Bridge Deck Panel Systems," National Cooperative Highway Research Program, NCHRP Report 584, Transportation Research Board, Washington, D.C., (2008).
Badie, S.S. "Full-Depth, Precast-Concrete Bridge Deck Panel Systems," NCHRP 12-65, TRB, National Academy of Science, Final Report, July 2006.
Badie, S.S. "Full-Depth, Precast-Concrete Bridge Deck Panel Systems," NCHRP 12-65, TRB, National Academy of Science, Interim Report, March 2004.
Badie, S.S., and Tadros, M.K., "I-Girder/Deck Connection for Efficient Deck Replacement," Final Report, Nebraska Department of Roads (NDOR), Project No. PR-PL-1(035) P516, December 2000.
Badie, S.S., "Superstructure/Substructure Joint Details," Final Report, Nebraska Department of Roads (NDOR), Project No. PR-PL-1(035) P514, October 1999.
Badie, S.S. "Structural Behavior of Bridge Deck Systems", Dissertation submitted to the Graduate College at University of Nebraska-Lincoln, Nebraska, USA, in partial fulfillment of the requirements for the degree of Doctor of Philosophy, December 1997.
Badie, S.S. "Approximate Analysis of Folded Plate Structures", Thesis submitted to the Engineering College, Ain Shams University, Cairo, Egypt, in the partial fulfillment of the requirements for the degree of Master of Science, July 1989.

Journal Articles

Silva, P., Mesia, W.D., Marzougui, D., and Badie, S.S., "Performance Evaluation Of The Impact Resistance Capacity Of RC Members," ACI Structural Journal, American Concrete Institute, (Accepted for publication in 2009).
Badie, S.S., Girgis, A.F., Tadros, M.K., and Nguyen, N.T., "Relaxing the stud spacing limit for Full-depth Precast Concrete Deck Panels Supported on Steel Girders (PART I)," ASCE Bridge Journal, American Society of Civil Engineering, (Accepted for publication in 2009).
Badie, S.S., Tadros, M.K., and Usdan, R.M., "Recommended Guidelines For Full-Depth, Precast-Concrete, Bridge Deck Panel Systems," Concrete International, American Concrete Institute, V. 31, N. 4, April 2009, pp. 53-58.
Silva. P. and Badie, S.S., "Optimum Beam-to-Column Stiffness Ratio for Portal Frames under Lateral Loads," STRUCTURES, Joint Publication of NCSEA-CASE-SEI, August 2008, pp. 34-36.
Badie, S.S. and Silva. P., "Optimum Beam-to-Column Stiffness Ratio for Portal Frames under Dead and Live Loads," STRUCTURES, Joint Publication of NCSEA-CASE-SEI, March 2008, pp. 17-20.
Badie, S.S., Girgis, A., and Nguyen, N., "Bigger is Better: Development of the 31.8-mm Diameter Shear Stud for Steel Bridges in USA," CEB-FIP, 2nd Symposium on Connections between Steel and Concrete, Stuttgart, Germany, September 4-7, 2007, pp 1437-1447.
Badie, S.S., Girgis, A., and Nguyen, N. "Development and Application of Large-size Shear Studs to Steel Girder Bridges," American Institute of Steel Construction (AISC) Journal, 2nd Quarter, V. 44, No 2, 2007, pp 79-90.
Badie, S. S., Tadros, M. K., Kakish, H., Kamel, M., and Baishya, M. C., "Rapid Deck Replacement," CONCRETE INTERNATIONAL (CI), American Concrete Institute (ACI), Vol. 26, No. 7, July 2004, pp.72-82.
Tadros, M.K., Badie, S.S., and Kamel, M.R., "Girder/Deck Connection for Rapid Removal of Bridge Decks," Prestressed/Precast Concrete Institute (PCI) Journal, May-June 2002, Vol. 47, No. 3, pp. 2-12.
Badie, S.S., Tadros, M.K., Kakish, H.K., Splittgerber, D.L., and Baishya, M.C. "Large Studs for Composite Action in Steel Bridge Girders," American Society of Civil Engineering (ASCE), Bridge Journal, May/June 2002, Vol. 7, No. 3, pp. 195-203.
Badie, S.S. and Tadros, M.K., "Superstructure/Substructure Connection Details for I-Girder Prestressed Concrete Bridges," Prestressed/Precast Concrete Institute (PCI) Journal, March-April 2001, Vol. 46, No. 2.
Badie, S. S. and Tadros, M.K., "Flexural strength According to AASHTO LRFD Specifications," Prestressed/Precast Concrete Institute (PCI) Journal, July-August, Vol. 44, No. 4, 1999, pp. 122-127.
Badie, S. S., Baishya, M. C, and Tadros, M. K., "Innovative Bridge Panel System A Success," CONCRETE INTERNATIONAL (CI), American Concrete Institute (ACI), V. 21, No. 6, June 1999, pp. 51-54.
Badie, S.S., Kamel, M.R., and Tadros, M.K., "Precast Pretensioned Trapezoidal Box Beam for Short Span Bridges," Prestressed/Precast Concrete Institute (PCI) Journal, Vol. 44, No. 1, January/February, 1999, pp. 48-59.
Badie, S.S.; Baishya, M.C, and Tadros, M.K. "NUDECK- An Efficient and Economical Precast Bridge Deck System," Prestressed/Precast Concrete Institute (PCI) Journal, September-October, Vol. 43, No. 5, 1998, pp. 56-74.
Yamane, T.; Tadros, M.K.; Badie, S.S., and Baishya, M.C. "Full-Depth Precast Prestressed Concrete Bridge Deck System," Prestressed/Precast Concrete Institute (PCI) Journal, May-June, Vol. 43, No. 3, 1998, pp. 50-66.
Badie, S.S. and Salmon, D.C. "3-Noded Curved Isoparametric Soil Interface Element," Computers and Structures, Vol. 65, No. 2, 1997, pp 205-212.
Badie, S.S.; Salmon, D.C., and Beshara, A.W. "Analysis of Shear Wall Structures on Elastic Foundations," Computers and Structures, Vol. 65, No. 2, 1997, pp 213-224.
Badie, S.S. and Salmon, D.C. "A Quadratic Order Elastic Foundation Finite Element," Computers and Structures, Vol. 58, No. 3, 1995, pp 435-443.
Beshara, A.W. and Badie, S.S. "Interaction between Joints and Frame Elements," Engineering Bulletin, Ain Shams University, Cairo, Egypt, No. 25/1, April, 1990.
Beshara, A.W.; Korashy, A.A.; El-Aghoury, M., and Badie, S.S. "Simple Finite Element Model for Long Span Spacious Structures," Engineering Bulletin, Ain Shams University, Cairo, Egypt, No. 24/3, December, 1989.

Refereed Conference Proceedings

Badie, S.S., Tadros, M.K., and Usdan, R.M., "Recommended Guidelines For Full-Depth, Precast-Concrete, Bridge Deck Panel Systems,"National Bridge Conference (NBC) Sponsored by Precast/Prestressed Concrete Institute (PCI), Orlando, FL, October 4 to 7, 2008.
Hasenkamp, C.J., Badie, S.S., Tuan, C.Y., and Tadros, M.K. "Sources Of End Zone Cracking Of Pretensioned Concrete Girders," 2008 Concrete Bridge Conference, HPC: Safe, Affordable, and Efficient, May 4-7, 2008, Hyatt Regency, St. Louis, Missouri.
Badie, S.S., Girgis, A., and Nguyen, N., "Bigger is Better: Development of the 31.8-mm Diameter Shear Stud for Steel Bridges in USA," CEB-FIP, 2nd Symposium on Connections between Steel and Concrete, Stuttgart, Germany, September 4-7, 2007, pp 1437-1447.
Badie, S.S., Girgis, A., Sriboonma, K., and Tadros, M. K., "Non-Prestressed Panel-To-Panel Connection Details For Full-Depth Precast Deck Panels," PCI/NATIONAL BRIDGE CONFERENCE, Paper No. 74, October 22-24, 2007, Phoenix, AZ.
Badie, S.S., Girgis, A., Sriboonma, K., and Tadros, M. K., "Extending Spacing of Horizontal Shear Connection Pockets from 24 to 48 inches for Steel Girders," PCI/NATIONAL BRIDGE CONFERENCE, Paper No. 32, October 22-26, 2006, Grapevine, TX.
Girgis, A., Badie, S. S., Chaunbing, S., Sriboonma, K. and Tadros, M. K., "Utilization of Full-depth precast concrete bridge deck panels in USA," The Second Federation Internationale Du Beton Congress, fib 2006.
Badie, S. S. and Mesia, W. "A Comparative study of Creep & Shrinkage Models for HPC" The Second Federation Internationale Du Beton Congress, fib 2006.
Badie, S.S., Nguyen, N. and Girgis, A. "Development and application of large-size studs in USA" The Second Federation Internationale Du Beton Congress, fib 2006.
Mesia, W. and Badie, S. S., "A Comparative study of Creep & Shrinkage Models for HPC Prestressed Members," PCI/NATIONAL BRIDGE CONFERENCE, October 2005.
Badie, S. S., Girgis, A., Nguyen, N., and Tadros, M. K., "Utilization of large-size studs with precast concrete deck panels," PCI/NATIONAL BRIDGE CONFERENCE, October 2005.
Badie, S.S., Patel, P., Tadros, M.K., and Rose, J. "Utilization of Full-Depth, Precast Concrete Deck Panels, Past and Future," PCI/NATIONAL BRIDGE CONFERENCE, Oct. 17-20, 2004, Atlanta, Georgia.
Badie, S.S. and Patel, P. "USE OF FULL-DEPTH PRECAST CONCRETE DECK PANELS IN BRIDGES IN UNITED STATES", fib Symposium on Segmental Construction in Concrete, New Delhi, India, November 26 to 29, 2004.

Distinctions

"Certificate of Special Merit, The Bridge Design Manual" awarded by the Technical Activities Committee of the Precast/Prestressed Concrete Institute (PCI), USA, to acknowledge key co-authors of the PCI-Bridge Design Manual, October 2004.
"The 2002-2003 Professor of the Year Award"
"The CERF/IIEC Charles Pankow Award for Innovation - Finalist" awarded by the Civil Engineering Research Foundation (CERF), affiliated with the American Society of Civil Engineers (ASCE), USA, April 2002.
"The ACI Structural Engineering Award-2001" awarded by the American Concrete Institute (ACI), USA.